English
中文站
The hand-knitted flat knitting machine has two obliquely opposed needle beds with an inverted "V" shape in appearance. The knitting of the flat knitting machine is completed by the reciprocating movement of the needle bed equipped with the loop forming machine on the needle bed, and the driving of the latch needle in the needle groove up and down. The flat knitting machine is actually a double needle plate tongue and needle weft knitting machine. Its triangular device is like a set of flat cams. The needles of the knitting needles can enter the grooves of the cam to move the triangles, forcing the knitting needles to be in the needle grooves of the needle plate. With a regular up and down movement inside, and through the action of the needle hook and the tongue, the yarn can be knitted into a knitted fabric. During the ascent of the knitting needle, the loop gradually withdraws from the needle hook, opens the needle tongue, and exits the needle tongue hanging On the needle bar; during the descent of the knitting needle, the needle hook catches the yarn placed by the new pad and pulls it into a loop, and the original stitch is pulled out of the needle hook, and the new stitch passes through the old stitch , In series with the old stitches, a large number of knitted stitches are connected to each other to form a knitted fabric.
The main components of flat knitting machine
Frame, needle board, guide rail, faucet, flower board.
Frame: There are two hills, and two beams connect the hills into a whole, which is a casting. The rack is provided with a wrench, a wrench fixing screw, a needle supporting plate screw, and a needle supporting plate screw compression spring.
Needle plate: The steel plate is made of fine steel refined heat treatment, which has considerable wear resistance and rust resistance. The slot is milled with large bead, small bead, machine needle, tofu block and fixing screw.
Guide rail: The guide rail is made of castings or special steel. It is fastened to the frame with fixing screws. It is generally divided into two front and rear. It is a track for the head to walk. There is also a yarn feeder guide above the rear guide. It is used when the yarn feeder randomly moves the head from left to right or replaces the yarn feeder.
Flat knitting machine faucet: the heart of the flat knitting machine, the entire head part is installed on it, its parts include front and rear faders, pusher burnt wooden balls and screws, pusher slider, and the slider is equipped with bearings. The front part of the faucet is equipped with a three-eye cover plate. The screw passing through the three eyes is a needle-lifting triangle rod. The screw in the center eye is called a live-heart jack-rod screw. The scale with the surface is called the scale plate, and the small green plate is installed on the scale plate, and the screw in the center of the scale plate is called the screw at both ends. The lower ends of the screws at both ends are fastened to the big triangle, the center of the screws at both ends is installed to look at the pointer, and the pointer is equipped with ingot screws. A swing frame is installed behind the faucet. The swing frame is equipped with a swing rod and a shuttle rod. The rear side of the machine head is also equipped with a latch switch. The main part above the machine head is a flower plate.
Flower plate: The flower plate is the center of the flat knitting machine. It has a bottom plate seat and an insert structure. All triangles are installed on the bottom plate seat. The triangles on the flower plate include the starting triangle, the heart triangle, the herringbone triangle, and the big triangle.
The main components of flat knitting machine
Frame, needle board, guide rail, faucet, flower board.
Frame: There are two hills, and two beams connect the hills into a whole, which is a casting. The rack is provided with a wrench, a wrench fixing screw, a needle supporting plate screw, and a needle supporting plate screw compression spring.
Needle plate: The steel plate is made of fine steel refined heat treatment, which has considerable wear resistance and rust resistance. The slot is milled with large bead, small bead, machine needle, tofu block and fixing screw.
Guide rail: The guide rail is made of castings or special steel. It is fastened to the frame with fixing screws. It is generally divided into two front and rear. It is a track for the head to walk. There is also a yarn feeder guide above the rear guide. It is used when the yarn feeder randomly moves the head from left to right or replaces the yarn feeder.
Flat knitting machine faucet: the heart of the flat knitting machine, the entire head part is installed on it, its parts include front and rear faders, pusher burnt wooden balls and screws, pusher slider, and the slider is equipped with bearings. The front part of the faucet is equipped with a three-eye cover plate. The screw passing through the three eyes is a needle-lifting triangle rod. The screw in the center eye is called a live-heart jack-rod screw. The scale with the surface is called the scale plate, and the small green plate is installed on the scale plate, and the screw in the center of the scale plate is called the screw at both ends. The lower ends of the screws at both ends are fastened to the big triangle, the center of the screws at both ends is installed to look at the pointer, and the pointer is equipped with ingot screws. A swing frame is installed behind the faucet. The swing frame is equipped with a swing rod and a shuttle rod. The rear side of the machine head is also equipped with a latch switch. The main part above the machine head is a flower plate.
Flower plate: The flower plate is the center of the flat knitting machine. It has a bottom plate seat and an insert structure. All triangles are installed on the bottom plate seat. The triangles on the flower plate include the starting triangle, the heart triangle, the herringbone triangle, and the big triangle.
